Arch Supports


IB 720
######### The IB 720 is a 3/4 Rigid High Arch Support with a slight met raise designed for wide feet. This support is completely heat moldable and reheat formable, whether fitting directly to the foot or a positive cast. The thin profile allows it to fit in almost any shoe while leaving room for posting, accommodative adjustments as well as the addition of top covers.
A B C D E F G H
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 8-9
W 9-10 		M 9-10
W 10-11 		M 10-11
W 11-12 		M 11-12
W 12-13 		M 12-14
W 14+
IB 722
######### The IB 722 is a 3/4 Rigid Arch Support with a slight met raise that comes in High, Medium & Low Arch Height's. This product is completely heat moldable and reheat formable. At 1.4 mm it can be formed to fit comfortably in any dress shoe including 'high heels' while maintaining its rigidity for excellent control. Make sure to look at our easy add top cover kits and our new glove covers in this section of the product catalog.
A B C D E F G H
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 8-9
W 9-10 		M 9-10
W 10-11 		M 10-11
W 11-12 		M 11-12
W 12-13 		M 12-14
W 14+
IB 724
######### The IB 724 is a 1.3mm 3/4 Semi Rigid Arch Support with a 12 mm heel cup. This product is ideal for dispensing right out of the package as it has a medium arch height and offers great control. This support is completely heat moldable and reheat formable, whether fitting directly to the foot or a positive cast. The thin profile allows it to fit in any shoe while leaving room for accommodative adjustments as well as the addition of top covers or posting.
B C D E F G
M 5-6
W 7-8 		M 6-7
W 8-9 		M 8-9
W 9-10 		M 9-10
W 10-11 		M 10-11
W 11-12 		M 11-12
W 12-13
Top Cover
######### We designed our top cover kits to be a quick, painless way of adding a full-length cover to our IB Arch Supports. The kit consists of a full-length 1/8 inch fabric covered medical blue poron with a peel and stick treatment throughout. As well as a 1/16 inch square of bottom sole material to give the Orthotics a clean finished look. Simply peel appropriate size and apply to the top of the arch support, then place the bottom sole to the bottom side of the toe box and trim.

NO Grinding, NO Glue

Available in Small, Med and Large
Glove Cover
######### Our Glove Covers are a fantastic way to add both style and comfort to our IB Heat Mold Orthotics. They are a fully stitched, simulated leather pocket designed for our Orthotics to quickly slip into while being completely covered. These are available in both 3/4 and full length and all come with a thin internal layer of urethane padding for extra comfort.

Currently available for IB 720 & 722s
A B C D E F G H
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 8-9
W 9-10 		M 9-10
W 10-11 		M 10-11
W 11-12 		M 11-12
W 12-13 		M 12-14
W 14+



Performance RX1 Rigid/Semi Rigid/Flexible
######### ######### ######### Thin strong blanks for manufacturing custom orthotics.
Pre-molded with a 25mm extra deep heel cup. 10x Stronger than carbon fiber or graphite.







Pre-Fabs (Flexible)


ZXW Wide Shell
######### The Sport ZXW is similar to the regular ZX except the shell is wider giving more support for a wider foot. Our Sport ZX Line is modeled after custom orthotics and is a very comfortable, cost effective device for those needing relief of foot pain. Great for off loading the foot and the exposed bottom shell makes for easy adjustments by adding posting. This insole has a heel cup for control and very low profile, which enables it to fit comfortably in most low depth shoes.
A B C D E F G H
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 8-9
W 9-10 		M 9-10
W 10-11 		M 10-11
W 11-12 		M 11-12
W 12-13 		M 12-14
W 14+



ZXO Open Top Cover
######### For the Practitioner that desires to accommodate and finish the orthotic with some custom work this the ideal product. We have left the forefoot open so you can add a met pad, do a cutout or add an extension. The possibilities are endless.
A B C D E F G H
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 8-9
W 9-10 		M 9-10
W 10-11 		M 10-11
W 11-12 		M 11-12
W 12-13 		M 12-14
W 14+



AirSoft Glider
######### The Glider is a semi flexible orthotic that is made with a 2mm 3/4 poly pro shell. This insole has a 1/8 inch cushion layer of EVA and Neolone through the arch and heel with a 1/16 inch Neolone throughout the forefoot. All of our Gliders come standard with a poron plug for heel spurs and pain as well as a heel cup for control.
Our AirSoft Glider is modeled after custom orthotics and is a very comfortable, cost effective device for those needing temporary relief that are unable to tolerate more rigid devices. These have a very low profile, which enables it to fit comfortably in most low depth shoes.
We offer many options on this product, from 3/4 or full length to packaging and custom printing your information on every pair with no minimum requirements.
A B C D E F G H
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 8-9
W 9-10 		M 9-10
W 10-11 		M 10-11
W 11-12 		M 11-12
W 12-13 		M 12-14
W 14+
AirSoft Glider Posted
######### This option of the Glider is also a semi flexible orthotic that is made with a 2mm 3/4 poly pro shell and has a 1/8 inch cushion layer of EVA and Neolone through the arch and heel with a 1/16 inch Neolone throughout the forefoot. We have added a rear foot post for additional control and of coarse every pair comes with a poron plug for heel spurs and pain as well as a heel cup for control.
Available in 3/4 or full length and custom print up to 3 lines on as few as one pair.
A B C D E F G H
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 8-9
W 9-10 		M 9-10
W 10-11 		M 10-11
W 11-12 		M 11-12
W 12-13 		M 12-14
W 14+
Glider Slim
######### The Slim is a low cost solution for those who are not looking to spend a lot of money. It is a very comfortable device that has a 1/8 inch felt covered poron top with a 2.5 mm poly pro shell, easy to tolerate with no break in period. Great for all activity levels and comes in either Sulcas or Full length.
Custom printing of your information is available on the top or bottom of the insole with no minimum order requirements.
A B C D E F G
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 7-8
W 9-10 		M 8-9
W 10-11 		M 9-10
W 11-12 		M 11-12
 
Accomodator
#########
A B C D E F G
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 7-8
W 9-10 		M 8-9
W 10-11 		M 9-10
W 11-12 		M 11-12
 
Kiddie Kruisers
######### JM Orthotics introduces their new pediatric line. Named the 'Kiddie Kruisers' they offer excellent control especially for a prefabricated device. Made to fit an average foot and arch height, the orthotics can also be easily adjusted with a heat gun for an exact fit. They come with rear foot posting and a soft padded top cover with slow release poron making them immediately comfortable and cost effective. Sizes range from 5-12 (children's sizes). Doctors are encouraged to stock at least one pair of each size and replace as needed.
Sizes range from 5-12 (childrens sizes)






Pre-Fabs (Semi-Rigid)


AirSoft Glider XL
######### The Glider XL is a semi Rigid orthotic that is made with a 3mm 3/4 poly pro shell. This insole has a 1/8 cushion layer of EVA & Neolone through the heel & arch and 1/16 inch neolone throughout the forefoot.
Our AirSoft Glider Line is modeled after custom orthotics and is a very comfortable, cost effective device for those needing relief of foot pain. Great for off loading the foot and the exposed bottom shell makes for easy adjustments by adding posting. This insole has a heel cup for control and very low profile, which enables it to fit comfortably in most low depth shoes.
We offer many options on this product, from 3/4 or full length to packaging and custom printing your information on every pair with no minimum requirements.
Make sure to look at our PSA treated posting materials to save time and money.
A B C D E F G H
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 8-9
W 9-10 		M 9-10
W 10-11 		M 10-11
W 11-12 		M 11-12
W 12-13 		M 12-14
W 14+
AirSoft Glider XLT
######### The Glider XLT is designed for comfort, it has a semi Rigid orthotic that's made with a 3mm 3/4 poly pro shell. This insole has a 1/8 inch cushion layer of EVA & Neolone through the heel & arch and an additional 1/16 inch layer of EVA on the bottom of the forefoot.
Our AirSoft Glider Line is modeled after custom orthotics and is a very comfortable, cost effective device for those needing relief of foot pain. Great for off loading the foot and the exposed bottom shell makes for easy adjustments by adding posting. This insole has a heel cup for control and very low profile, which enables it to fit comfortably in most low depth shoes.
We offer many options on this product, from 3/4 or full length to packaging and custom printing your information on every pair with no minimum requirements.
A B C D E F G H
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 8-9
W 9-10 		M 9-10
W 10-11 		M 10-11
W 11-12 		M 11-12
W 12-13 		M 12-14
W 14+
Glider Rigid
######### The Rigid Controller is a 3/4 shell with a waffled bottom to make for great arch support and control. It comes with a 1/8 felt covered poron top cover for great shock absorption and will never bottom out.
Custom print is available with no minimum requirements.
A B C D E F
M 3-4
W 5-6 		M 5-6
W 7-8 		M 6-7
W 8-9 		M 7-8
W 9-10 		M 8-9
W 10-11 		M 9-10
W 11-12



Heat Mold Accessories


Heat Mold Pillow
######### A soft pillow designed to add resistance to an Orthotic that is being molded to a patients foot. Best when used with our Hot Top covers that can be found in this section.
Please see Heat Mold Instructions for detailed information.
Hot Top
######### The Hot Top is a fabric covered heat shield that is used to protect the patient while molding hot Orthotics directly to their feet.
Please see Heat Mold Instructions for detailed information.



Posting Materials


3 Degree Posting Wedges
######### These are 70 Durometer EVA wedges with a PSA treatment that can be used for forefoot or rearfoot, varus or valgus. No glue is required, simply peel and stick for fast adjustments that last. Angled at 3 degrees, no grinding necessary.
Comes in bags of 24.
5 Degree Posting Wedges
######### These are 70 Durometer EVA wedges with a PSA treatment that can be used for forefoot or rearfoot, varus or valgus. No glue is required, simply peel and stick for fast adjustments that last. Angled at 5 degrees, no grinding necessary.
Comes in bags of 24.
5 Degree Posting Strip
######### These are 70 Durometer EVA wedges with a PSA treatment that can be used for forefoot or rearfoot, varus or valgus. No glue is required, simply peel and stick for fast adjustments that last. Angled at 3 degrees, no grinding necessary.
Comes in bags of 24.
1/4 Inch Heel Lift Strip
######### This is a 70 Durometer EVA strip that’s 14 inches long and 3/4 inch thick throughout, it has a PSA treatment and can be used for lifts, corrections and adjustments. High adhesion makes for a great lasting bond, just cut to desired size and shape, peel and stick. No Glue Required



Diabetic Insoles


Diabetic Insole
######### This bi-layer diabetic insole is SADMERC coded for A5512, heat mold to foot. It has a 1/8 inch Pro Cell top with a 3/16 Blue EVA base.
X Small Small Med Large X Large XX Large
 
W 5-7 		M 6-7
W 8-9 		M 8-9
W 10-11 		M 10-11
  		M 12-13
  		M 14-15
 
Diasole
######### The JM Dia-Sole is a bi-layer diabetic insole that is SADMERC coded for A5512, heat mold to foot. The top layer is a 1/8 inch Flesh EVA 15-20 Shore A with a 3/16 inch Blue Urethane EVA Hybrid base layer that is heat moldable yet will not pack out. This Diabetic insole offers great support though the arch.
A definite must see...
X Small Small Med Large X Large XX Large
 
W 5-7 		M 6-7
W 8-9 		M 8-9
W 10-11 		M 10-11
  		M 12-13
  		M 14-15
 



Sheet Materials


Bi-lam Sheet
######### Our Bi-Lam is a 30 X 48 inch Sheet with a 1/8 inch Pro Cell 20-25 Shore A top layer and 3/16 inch Blue EVA 40 Durometer base. Bi-lam sheet meets Medicare requirements for making Custom Diabetic Insoles.
Tri-lam Sheet
######### Top layer 1/8 inch flesh easy A 15-20 Shore A, Middle layer 1/16 inch medical blue poron, Bottom layer 1/4 tan, 65-70 durometer 40-45 Shore A. Sheet size 35 X 40 Inches. Meets medicare requirements for custom diabetic inserts.